The main structure and properties of (1 tons -40 tons)

First, the use of I-beam machine SLIDE, channel steel, steel, iron welded together
Second, Chuan-motivated by the motor and variable speed drive, the drive chain sprocket rotation axis device, driven by chain extension units work, the use of wire rope trolley drive return work
C, cylinder-type machine SLIDE: 1 ton -3 tons, only one operation, the front is more than I-beam welded together, the work of the Department and the extension units with a large clamp Block One Block Clamp the second, a small clamp Block III, and more steam is then automatically generated by the cylinder to work. -2 Tons 1 metric ton at the same time can also make partial pull-type, operation does not need a hand to take over, nor in the chain舍掉directly off the shelves in the material, so that pipes do not hit, the speed can improve the quality of products fast, effective.
Fourth, scissors-style machines SLIDE: 5 tons -40 tons, the front channel so the framework of the use of welded together, a maximum use of the track bed from paved from 400 tons Extruder Extruder Extruder -1500 tons to through the blank SLIDE into various models of machines pull tubes, smooth comfortable car.
V. At the same time, widespread acclaim SLIDE manufacturers, technology is the form most

LW1-LW40 SLIDE cold-drawing machine main technical parameters:

Model	LW1	LW2	LW3	LW5	LW8	LW10	LW20	LW30	LW40
Clamp diameter of the largest expected	Ф10	Ф15	Ф20	Ф25	Ф30	Ф35	Ф40	Ф45	Ф50
Drawing speed	25-35	25-35	20-30	20-30	15-28	15-28	10-23	10-20	8-12
Return to the speed of car	50-75	50-75	50-75	50-75	40-65	40-65	40-65	40-65	40-60
With motor skill（KW）	5.5	7.5	11	22	37	45	75	110	160
With motor speed (r / min)	1400	1400	1400	1400	1400	1400	1400	1400	740
Allocation model with reducer	JZQ350	JZQ400	JZQ500	JZQ650	JZQ50	JZQ850	ZS1000	ZS1250