This unit is a one-time waterproofing membrane composite (plastic film salivation) equipment, both one-time use of multi-layer co-extruded composite waterproofing membrane, but also can be used as a cast film and sheet production.
It is mainly from the extruder, die salivation, salivation embossed molding machine, while waste recovery unit, composed of rolling machines. Salivation process using the device will be the main raw material of polyethylene, such as by extrusion melt mixing was shaped by the extrusion die down, with the polypropylene or polyester non-woven composite, such as salivation, the necessary products. Host the unit for the flat nose dies, embossed rolls can design their own patterns, for the friction-type rolling machine rolling.
Technical parameters:
|
Model |
FLM1500 |
FLM2100 |
|
Screw extruder(mm) |
Φ90×28-33 |
Φ100×28-33 |
|
Composite (salivation) width(mm) |
1150-1500 |
1150-2100 |
|
Composite (salivation) thickness(mm) |
0.05-2.00 | |
|
Production line speed(m/min) |
2-100 | |
|
I. Roll length(mm) |
1300-1650 |
1650-2200 |
|
Coiler drum core specifications(mm) |
ΦOutside70(80)×ΦWithin55×(max.)1500 |
ΦOutside80(90)×ΦWithin65×(max.)2100 |
|
Production capacity(kg/h) |
100-250 |
150-300 |
|
The total electric power(kw) |
100 |
150 |
|
Gas flow(m3/min) |
0.9 |
1.0 |
|
The total supply (Circular)(m3/min) |
0.2 |
0.3 |
|
Overall dimension (L × W × H)(m) |
9.5×4.1×3.4 |
10.5×5×4 |
|
Machine weight(t) |
about16 |
20 |